1. The connecting parts and fasteners of the cycloidal gear reducer must not be loose

2. The cycloidal pinwheel reducer operates smoothly without any impact or uneven noise

3. The load test of the reducer should comply with the technical requirements of manufacturing and acceptance

4. The sealing components of the cycloidal gear reducer must not have oil leakage or leakage

5. The lubrication and cooling of the cycloidal gear reducer adopts a pool type, using 100 # medium extreme pressure gear oil, with a minimum oil level of 205MM and a maximum oil level of 230MM

The output shaft speed of the cycloidal gear reducer does not take into account the slip loss of the motor (4-stage motor). When precise speed is required, the reduction ratio is divided by the actual speed of the motor.